If you are a beginner portrait photographer, you must have tried indoor photography with a flash. When you use a flash correctly, the chances of getting better photos in minimum shooting time increase. But the opposite is also true. If you are still figuring out how flash works, your photos may end up being an absolute disaster. Also, in some cases, natural light is more suitable in indoor photography, not flash. So, you should learn how to click indoor photography without a flash.
Top 3 Tips For Indoor Photography Without Flash
The most important source of lighting in indoor photography is the window light. To get a dramatic portrait, position your model in such a way beside the window that one side faces the light, and shadows are formed on the opposite side. You can also make use of household lights. Even simple bulbs can do wonders if you place them in the right way. To click a classic portrait, you can just follow a basic lighting setup technique. Take two light sources- place one in front of the model, and the other at back. The first one, which is the main light, should be set up a bit higher than the model's head. The second one, the backlight, is as far from the model as possible, checking the kind of dimension you want to add to your photo.
The right camera settings will produce the best results- everyone knows that. But the fact is, not every photographer uses the same settings. Also, the camera settings that work great in one scenario of indoor photography might not turn out well in another. But there are some common settings that more or less produce good results in indoor photography without flash, that you can try out. Firstly, set your camera in Aperture Priority mode. The aperture should be as wide as possible, (minimum f/2.8). You can increase the ISO to a maximum of 800- try not to exceed it. Needless to say, shoot in RAW format so that you can take full advantage of post-processing to correct and improve your images.
The two most common areas that you should adjust during post-processing are the white balance and noise. There are different degrees of color mixes when you shoot indoors with artificial light, and also let natural light come through the window. Set a certain white balance setting while post-processing, and correct the areas where the colors went wrong. Do not worry about the formation of noise if you have no other option than to use high ISO in the shooting. There are many tools for correcting the noise in any editing software. These two are the most basic post-processing techniques that you must employ. Apart from these, you can also get more creative in editing depending on your expertise and requirements.
Shooting without flash creates a fresh look if you can do it properly. As you got to know the tricks for that, no one can stop you from excelling in this field. All you need to do is- do lots of practice, employing the techniques mentioned above.
Written By Sanga Basu, Content Writer, WPC.